-40%
Genuine Canon QY6-0083-000 Print Head for MG6320 MG7120 MG7520 MG7720 IP8720
Genuine Canon QY6-0083-000 Print Head for MG6320 MG7120 MG7520 MG7720 IP8720

Genuine Canon QY6-0083-000 Print Head for MG6320 MG7120 MG7520 MG7720 IP8720

$ 39.58

Availability: 100 in stock
  • Brand: Canon
  • Restocking Fee: No
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Compatible Brand: For Canon
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Compatible Series: Canon Pixma
  • MPN: QY6-0083-000
  • Type: Printhead
  • Condition: New

    Description

    Product Description
    New Genuine Canon QY6-0083-000 print head for MG6320 MG7120 MG7520 MG7720 IP8720
    Canon Printhead for MG6310, MG6320, MG6350, MG6370, MG7120, MG7220, MG7520, MG7550, MG7720, IP8720
    This is a
    new
    , unopened, genuine Canon printhead.  Canon does
    not
    include ink cartridges with their new print heads.  You
    can
    install the ink cartridges from your old print head in the new printhead if they still have ink in them.
    Wondering what causes print heads to go bad?  Usually it is not circuitry failure but simply dried nozzles.  The symptom of dried nozzles is white horizontal lines in the print for one or more colors.  Usually you can print a nozzle check from your printer software which shows a pattern of lines.  If a nozzle is dried, it will show a blank where there should be a line.
    Dried nozzles can be caused by several things, including a poorly seated ink cartridge, or lack of use (letting the printer sit for a few weeks without using).
    Sometimes print heads can be "resuscitated".  Of course, first start by running several cleaning cycles using your printer's software.  If that doesn't work, try removing the printhead and carefully cleaning the bottom of it with water.  Some of our customers have reported they've been able to get their print head unclogged by soaking the nozzles in Windex.
    Sometimes the printhead problems are caused not by a defective print head but by a “gunky” parking station.  The parking station is the place where the print head “rests” when it is not printing.  Usually it’s on the right side of the printer (looking at the printer from the front).  The parking station has rubber seals that are supposed to surround the printhead when it’s parked.  These seals have two purposes: 1) to keep the printhead from drying out when it is not printing, and 2) to provide a tight seal for strong suction when the printer is self-cleaning the head.  Some printers also have rubber wiper blades that move across the bottom of the printhead to remove accumulated ink.  All these rubber pieces get “gunked” up over time with condensed ink.  This prevents a tight seal, allowing the head to dry out.  The good news: the rubber can be cleaned!  Best tool is a Q-tip dipped in water.  You’ll need several Q-tips.
    For easier access to the parking station, open the cover of the printer so that the print head carriage comes to the middle (as if to replace an ink cartridge).  Unplug power from the printer.  Then use your hand to gently slide the printhead carriage over to the left, so that you can access the parking station (at right) more easily.  When you are finishing cleaning, close the printer, plug power back in, and turn it on.  The printhead will automatically return to the parking station.
    (
    Please Note:
    we will not be responsible for any damage to property or persons which result from these instructions. Thanks for your understanding.)
    Payment
    We only accept payments through PayPal.
    An order begins processing once payment has cleared.
    Shipping
    Standard shipping: 2-7 business days
    Expedited Shipping: 2-3 business days
    Returns
    1.We only warranty cost of parts. Any installation or other fees are non-refundable.                                                                                                                                                                                                       2.If a part arrives damaged, or is defective, it is our responsibility to take care of it but it must be reported to us immediately.
    Contact Us
    If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you.
    New Cartier High Quality Stainless Steel Love&Nail Bracelet Set with Screwdriver
    29.0 USD
    Free shipping
    MMA Boxing Speed Trainer Ripid Spinning Bar with Punch Head & Punch Bag
    159.99 USD
    Free shipping
    Universal Black Recliner Replacement Pull Handle Chair Sofa Couch Release Lever
    6.99 USD
    Free shipping
    170° CMOS Car Rear View Backup Camera Reverse HD Night Vision Waterproof CAM US
    10.99 USD
    Free shipping
    Progress Rainbow Pride Premium Waterproof Polyester Flag 3'x5' 3x5 Durable Bold
    6.99 USD
    Free shipping
    7 Port USB 2.0 Hub LED Powered High Speed Splitter Extender Cable US
    7.99 USD
    Free shipping